Japanese beehive

Japanese beehive: design and Benefits.

Recently, domestic beekeepers pay attention to the experience of foreign colleagues.

Many beekeepers America and Japan at low cost and efforts to get a huge number of bee nectar.

New trends among our Japanese hive beekeepers.

By design it is very similar to a beehive Warri. Japanese beekeeping is different from domestic through different climate, but the overall design of hives and applied in our latitudes.

Most, that in this house no borders and classic slots for them.

Instead frames inside the box are krestovyna, where and build honeycombs insects.

Beehive attractive for its simplicity, After all, work with it very easily. That is why in the domestic Japanese used beekeeping hives.

1. Instructions on making Japanese beehive
2. Advantages Japanese hives

Instructions on making Japanese beehive

To start, choose a suitable material. The thickness of the boards knocked depending on your preference.

According to the drawings and instructional videos, you have to cut some walls, size 30 on 20 cm. Connect 4 wall, using liquid nails.

In mid produce harmlessly. It can be metal or wooden slats.

Total these buildings need some. Eye Japanese only one hive. It is located at the bottom.

lower part, or bottom, beyond the walls of the housing. Then made the cover of an air bag.

Read: Hives foam (polyurethane) – specifics.

How it looks, see video.

Advantages Japanese hives

• little time spent on making the hive;
• little consumption of materials;
• absence swarming;
• honey from beehives shown by removing the upper body;
• ease of maintenance and insect hive.

At the beginning of the season set several buildings on each other. As the family added new buildings.

Insect cells are building from the top down, gradually sinking toward the notch.

Further, while the main medosbora, beekeeper will remove the top shell, separating metallic honeycomb string.

They are put in a bag and shipped under pressure.

Most, for the evacuation of honey that is not used extractor. There is no need to use land, navoschuvaty harvest and beyond.

Reconstruction and completion of hundreds of insects deal. As you can see, Japanese beehive – simple design, does not require calculations to create drawings.

To produce Japanese hive you need to make a drawing of the box and crosses.

All drawings are typical and differ only tall buildings. It can vary within 10-20 cm.

also read: Beehives own hands: drawing.

Before you make a hive Japanese, Look at the reviews beekeepers.

Many note, what, despite the exotic designs, it is well proven.

Vintage bee nectar above, than hives Dadana or hives lounges.

At that beekeepers have to spend less time on maintenance and care of beehives, because there is no need to obtain, insert and beyond navoschuvaty.