Beehives
Loading...
How do Beehives
Beehives own hands: drawing, a photo.
Subsequently experienced beekeepers try to apply new technologies in their apiary.
For this purpose they choose contemporary drawings and new materials for the manufacture of beehives.
Often as a material for making beer houses choose wood, but recently Beehives their hands at the peak of popularity.
Benefits hives Foam
- low price;
- low weight;
- simple design;
- resistant to moisture;
- do not freeze and do not heat up in the summer heat.
Despite this, Not all beekeepers tend to make a hive, as they find it fragile.
Really, the construction itself is fragile, so the hive should be neat. in addition, the walls of the house badly cleared of traces of propolis.
In normal wooden hive is solved using the blowtorch, but so houses Styrofoam can not be disinfected.
It uses special chemicals, which may harm bees.
Details can be found handling, watching videos.
Read: Multiple hives with their hands design, video.
Production Beehives
At the beginning decide the design house: it may be lager or alpine hive.
In practice, the simplest is to maintain Multiple alpine hives.
Then select or build drawings. The easiest way to use the typical drawings.
Then buy stuff. With pen image transfer details on polystyrene.
Stationery knife cut basic units.
Drawing of Beehives
Since the inside of the hive propolis can be very dirty, the inside of the plastic can be processed corners.
Then a hive can disassemble and clean. Sam hive consists of walls and floor.
Also it is necessary to produce folds under the frame. Parts fastened with glue, then screws. More details are shown in the video.
Feedback on Beehives completely different. Many beekeepers like the simple design and low weight of the house.
Some beekeepers say, which Beehives own hands – stupid idea.
through the, the design is not breathable, winter inside the box formed mold. Recommend on the bottom enter play.
Rack made of plexiglas. In some regions mouse make holes in these hives, since the material is soft.
When operating and maintenance costs not hit the surface of the beehive, not to break.
Beekeepers say, that this hive miss a lot of light, paint and can not be because, the material is susceptible to solvent.
Before making Beehives, read about the positive aspects of keeping bees in such houses:
- bee-queen begins laying eggs earlier in this slot, because it is lighter;
- to prevent the accumulation of moisture, necessary to provide vents, but insects will use more food and will organize circled sverhrannyy;
- a hive of family grow faster, and, so, the main medosbora you have a lot of flying insects;
- summer in the comfortable foam hive bees, as the nest is blown, in accordance, fewer cases of take-off and swarming.
Read: Beehive lounger with his hands on 16, 20, 24 framework: video
Features production Beehives
pay attention, Sales are standard size plates 1,2 on 0,6 m, so think, before transfer images to the material.
You need to try, left to waste as little as possible. Be sure to make a hive basis for deepening condensate.
The complex of bars you can make the design warmer and forget mold in the hive.
Before making carefully review the drawings and purchase the required number plates.
Once you cut details, you need to perform their grinding.
It uses sandpaper with fine grain size.
After bonding inspect the house for the presence of cracks.
If you find a gap polystyrene beehive, close them foam.
An alternative is polystyrene foam. This material is stronger, but much more.
Read: Hives "Biboks" (Bee-Box): advantages, specifics.
in addition, monolithic slab foam, which complicates their treatment.
Make penopolyuretanovi hives with their hands complicated, than foam.
As the connector parts of polyurethane used liquid nails.
