lounger Beehive

Beehive lounger with his hands on 16, 20, 24 framework: video, drawing.

Many beekeepers, especially those, who are just starting to engage in breeding bees, selected for their hive apiary lounger.

This design differs bee house, providing the horizontal expansion of space inside, rather than vertical, as is common in other systems.

The classic version resembles beds indefinitely, which has a bottom deaf, folding roof, two compartments for keeping bees, two lower and two upper notch in the housing.

So overall pretty soundly and long stretches building. It is for this hive and got its name.

Novice beekeepers I like to work with such designs because of the convenience to maintain bee colonies.

The expansion slots in the hive takes place in both directions, not up, both in scope and risers, not whole buildings.

At work do not have to lift and move heavy items. Time to review and amend consumes much less.

If there is a good offering and strong bdzholosim'yi nesting compartment put honey stores.

All versions of the hive sunbeds, used today in beekeeping, most often used during construction beyond dadanovski.

Their construction can be a different number.

Standard hives build on 20 and 24 framework, the popular species and include 16 frame hive.

Custom hives numbering beds 14, 18 or 32 section.

May be used and other frameworks, eg inverted dadanovska, rutovska or any other.

In fact, many beekeepers attributed to sunbeds any structure, which in width than height.

Housing for bees of this type are always available for sale. They are very popular and in demand by fans.

For those wishing to make a hive of lager with your hands need drawings, quality construction material (better wood) and little time for manufacturing.

Keep the apiary in these houses made easy, so it's worth a try.

1. Keeping bees in the hive sunbeds
2. Making beds in the hive 24 framework
3. Beehive on a sunbed 16 framework
4. What better hive?

Keeping bees in the hive sunbeds

Keeping bees in sunbeds is different. Inside the house a lot of space and insects can build strong families.

Extensive help housing colonies grow stronger, and therefore, and work productively on the trick.

Such homes actively engaged medosbora bees and harvest large amounts of feed.

Everything, what to do beekeeper, so it's time to expose the empty frame.

The increased space also stimulates the nest egg in the uterus high.

Bees are not prone to swarming.

Summer in the hive containing only one bdzholosim'yu, for winter occupancy in one case two colonies with a hollow compartment division diaphragm.

IN 24 hive framework allowed year-round residence two swarms, but we must ensure that, that bees do not mix and no stranger passed into the compartment during the inspection.

Hives beds insects excellent protection from the weather. They warm, dry and comfortable.

However, the large size of the hive beds and a small space pidramochnyy worsen its airing.

To ensure good air flow inside the space required device vents in the roof.

To quickly build families the early medosbora practice cultivation in a single package of basic family and more, of uterus-assistant, which are then combined into a single colony.

To vidvodok or a hive Nucleus rug separating diaphragm side of the hive.

This option is placing insects in one case greatly facilitates the work of the beekeeper apiary service.

No need to build more apartments for breeding work with bees beekeepers also brings economic benefits.

The remaining types of work to care for the bees in the loungers identical to, conducted in other types of hives.

The difference is, here is much easier to do.

Making beds in the hive 24 framework

To start building the hive for beds 24 framework must first determine the size of future.

For the calculations needed only internal values, because as a building material can be selected boards of different section.

Visual appearance of the finished product according to each individual master will come.

For under beds 24 dadanovski frame:

• the width of the housing 450 mm (This frame size 435 mm + the distance between the front and back by plane 7, 5 mm);
• height is box design – 390 mm (300 mm beyond this value + pidramochnyy space and nadramochnyy + ceiling and the ceiling height above);
• length to the number of sections and diaphragm 810 mm.

To help in the construction of the hive beds in a classic performance 24 framework helps drawings.

Make it to the hive is a snap. All the necessary values ​​in the listed there, a mark on them and accurately collect details hive – this is a task master.

1. The assembly unit start from the bottom. In his classic performance closely connect with the walls of the housing, but you do design and removable. It consists of three bars and two deck boards. The size of the three parties responsible external parameters hive. The front wall render ahead. Speaking section is prylitnoyu board for insects.
2. cells in 24 arrange four frame beehive. Two lower up to 150 – 250 mm and a height 12 mm round and two upper diameter 25 mm. The front and rear walls of the inside of the selected rebate under the scope.
3. Housing for two families share living dead iris. It is set vertically in the middle casing. For, to wall held firm and did not have gaps, cut out grooves in the walls of the entire length of the front and rear surfaces.
4. Case harvested after, as all preparations are made in pieces rozkroyuvannyu. For fastening use nails or screws. The walls of the hive should be mounted vertically and have angular connection 90 °. If it does not comply, scope of work will not be easy.
5. In loungers provided knockdown ceiling. For him choose the timber width equal 3 or 4 Frame and thick as 10 mm. The length of the ceiling design meets the inner sized hive.
6. The roof of a building loungers flat or sloping. Strapping overlap count or flush with the body and then the walls provide under its rebate, size or make the walls more, the external dimensions of the hive, and the roof simply dressed in a bee house.
7. Top assembled from planks, and then sheathed waterproofing materials. In the end walls strapping cut vents and close their net. To set the latch notch, strengthening their straps.
8. For ease of movement of the side walls are equipped with strong handles.

Chaise go very heavy, and to transfer them must have what he fastens.

However, in most cases, these structures tend not move and is used as stationary objects on amateur apiaries.

Beehive on a sunbed 16 framework

To stay one big bees build their hive hands lounger, designed to 16 Dadant frames.

The technology is similar to its production 24 Outline option. The height and width of the walls of the shell they have the same, but the length 16 Framework bee house and is slightly smaller 615 mm.

When making a body left only two eyes, top and bottom, which have the center on the front wall.

First cut size – 80 on 12 mm, other doing with dimensions – 250 on 12 mm.

To collect the honey is set on the body Shop Extension arm. Beat them have advance.

To do this, use the same intersection board, that were used to build housing.

Details of connecting the corners, to out box.

On the inner walls of the scope choosing rebate.

Dimensions Extension arm must meet Corps.

Each contains Extension arm 16 frame store size 435 on 145 mm.

On the side walls of the sections outside handles attached for convenience or cut in the material sinks.

Hung on the diaphragm housing rebate, fastening element occurs at its upper bar.

For, that part adjacent to housing construction tight, it equipped with rubber pads at the ends.

According to the rules of beekeeping, lounger during operation hive is placed on a stand, size to match the size of the bottom of the finished product.

What better hive – Multiple or lager

Novice beekeepers often wonder – Hive is best lager or Multiple?

To begin to understand why, that is, each of them has benefits.

Various home Bees, usually, divided into 2 main types:

1. Multiple hives – This vertical risers, which can be expanded by adding additional enclosures and frames. The design is increasing Up.
2. sunbeds – This horizontal hives, which in appearance resemble houses. Such designs can be expanded, adding details in the width.

Among the advantages Multiple constructions are the following:

• maximum compliance with the contents of bees;
• these apartments can hold up to 24 bdjolosimey;
• they are easy to move, them comfortably roam;
• must not work with individual frames, but with entire buildings.

Sunbeds are also strengths:

• removal of bees formed in the same hive near the main families;
• there is no need to move the heavy body and honey Extension arm;
• care (clean floor, insulate the nest) the following structures much easier.

in addition, to consider, horizontal cases which do not fully meet the biological and technological requirements for the best of bees and production.

Example, significant drawback of such designs is insufficient air and gas exchange during the winter.

exept this, horizontal hive much more cumbersome, Multiple than.

dilemma – lounger or Multiple hive should be decided based on experience and compliance structures beekeeper biological characteristics and requirements of bees.