Cable products "Odeskabel" – Pro100Cable

In various parts of the industry, a cable is required. Such products make it possible to connect machine tools or any complex energy-intensive equipment with transformer networks and produce competitive products in the mode 24/7. Because of this, the cable must have a different bandwidth., do not warm up and serve for a long time. All these criteria are fully met by the cable products of the Odeskabel plant., which is in stable demand in the domestic and foreign markets. Бренд «» Is a high quality product! But choosing a worthwhile cable for your own enterprise is considered not so easy., since they are different in design and functionality.

Types of cables

1. Power cables.
2. Control cables.
3. Self-supporting wire.
4. Connecting wires.
5. Winding wires.
6. RF cables.
7. LAN cable (twisted pair).
8. XLPE insulated cables.

Cable core material

1. Aluminum. It is considered the most common, since aluminum is cheaper than copper, has low resistance and lasts a long time. If you need to buy a lot of wires at a minimal cost, then the version with aluminum conductor will be the best solution.
2. Copper. The copper core is considered the most expensive, but copper is prized for its extremely low resistance. Even if you give a lot of current through such a cable, then it will not overheat and will last a long time.

External insulation

Most common paper insulation, which has good heat resistance and insulation. There are cables with sheathing of ordinary or silicone rubber, and more expensive models can have ordinary or PVC-compound. In any case, the outer insulation of the factory cable is of high quality., and it is able to withstand mechanical and climatic influences in the best way.

Cable section

Cable cross-sections can vary greatly, as well as the number of lived. In any case, you need to look at the amount of load. And only after that buy a cable of the required section. It is not always wise to take models with a narrow section - they can start to overheat. Sometimes it is better to play it safe and buy a version "with a margin", that is, with a large cross-section - cable products will not overheat and will last for years.

Factory employees, after analyzing all the conditions and needs of the client, are able to advise on the optimal choice of cable products or wires with the correct cross-section, in demand at a construction or industrial facility. It is worth contacting specialists, any client receives competent advice on all issues of a technical or organizational nature.