Chain link mesh production technology

Among the construction materials, the so-called chain-link mesh is well known to many., which is a woven product of zigzag wire stitches. The production of chain-link mesh is quite simple, but, in the same time, it does not tolerate amateurism.

The easiest way to get the basic structural elements (lines) such a mesh is a manual winding of wire on a mandrel strip (main, remember, that it is the width of this strip that determines the size of the cells of the future grid). But manual production in our century is used only for the production of chain-link mesh for individual purposes, But when it comes to mass production?, the, undoubtedly, the solution of the problem under consideration is carried out with the help of mechanized or automated labor.

Features of the production of chain-link mesh

To optimize such work as correctly as possible, you need to be very strict about the quality of the wire itself. She must be strong, wear-resistant and in no case should be torn when winding, and also it should not create the effect of strong springing actions. Особой популярностью пользуется «сетка рабица 60х60 мм», которая нашла широкое применение как при строительстве заборов, as well as for other construction works.

Next aspect, which requires a strict attitude, concerns winding pitch. And the key role in ensuring the proper quality of work here belongs to the conductor. The ideal conductor can be called a steel mechanism, the working surfaces of which are not modified (especially geometrically.) in contact with kilometers of wire.

The most durable, reliable and durable conductors are produced, usually, из термически обработанной инструментальной стали. Also, before working with wire, in most cases it needs to be pre-prepared. (handle) with the right machine. This is especially true, if the wire has been stored in coils for a long time (on frame frames, drums).

Storage and transportation of chain-link mesh

For ease of transportation and storage of the finished product, the chain-link mesh itself is rolled up in rolls. And again, the best, if this process is mechanized or automated. In particular, very comfortably, when devices for folding the mesh are built into the machines themselves for the manufacture of its web. In this case, the production process becomes as efficient and ergonomic as possible..

Production of chain-link mesh is economically profitable, as the demand for this type of product remains at a high level. This is a profitable production, and money, Spent on the purchase of equipment pays off in a short time.