2-x frame honey extractor: whether to buy
Loading...Today our topic will be a 2-frame honey race. Is it worth buying such a design or pay attention to something else?
Content
2-x frame honey extractor
2-x frame honey extractor is popular with beekeepers. Of course, not all, and in those, who is limited by the minimum number of frames inside the hive.
The point is, that when buying any equipment it is necessary to consider features of a design of beehives, used in your apiary. Otherwise, their use may not be as effective, as originally intended.
extractor, designed to handle two frames, can be equipped with different types of electric drive. The speed of honey collection when using such a design depends on the condition of this element.
Operation of such a device requires compliance with certain rules. First of all, it is necessary to be convinced of serviceability of all components of the mechanism.
If you have a quality design, then most likely you will not have any problems when harvesting in the apiary. Remember, that you also always have the opportunity to improve the purchased design or replace defective parts.
For, to achieve this effect, it is necessary to watch not only serviceability of a design, but also on the purity of its elements. Moreover, that these things are largely interconnected.
Pieces of honey can clog the elements, which activate the honey extractor. If you do not monitor their condition and do not remove excess particles in a timely manner, high probability. that your machine will fail prematurely.
It is not necessary to include the typewriter sharply. Remember, which is best, that at first it worked at low speeds. and only then can you gradually increase the speed of rotation of the rotor and, accordingly, the intensity of the collection of sweet honey products.
That there were no unpleasant situations, the machine must be securely attached to the floor before starting work. Check reliability of fastenings of a design, as well as the serviceability of the rotor mechanism.
Specifics
What are the main features of this design? First of all, as the name suggests, this machine is designed for use on hives, having two frames.
If you have a large number of frames, it is best to choose other types of such equipment, intended for collecting honey.
The main elements of this design are very easy to list:
- drain cock;
- occasion;
- tank;
- rotor;
- cartridges.
In principle, there is nothing complicated in such a device. It will not be difficult to operate it either, but will greatly facilitate the responsibilities of the apiary owner, automating the process of harvesting honey products.
Rinse the main honey extractor tank thoroughly before switching on the appliance. It is best to do this, using running water.
Then it is better to wipe all the parts and dry the structure. And then to check up serviceability of all details and only then to start direct work already.
Rotor, used to drive the honey collection mechanism, allows you to exercise to 300-400 revolutions in one minute. So, you have a fairly powerful tool.
You don't even have to compare the speed of a person's work, manually collects honey, and that, who decided to resort to the help of an electronic typewriter, equipped with a powerful engine. of course, that in the second case, it will be significantly higher.
Prices
Before buying, you need to price. well, that there are currently a lot of offers on the market, and this allows you to choose the best option for you in terms of value for money.
What is the amount of honey this design is designed for? This parameter depends on the volume of the inner honey pocket.
Usually, it is designed to receive from 15 to 20 kilograms of marketable honey. For a small apiary such volumes are quite enough.
It is not necessary to save on purchase of similar stock. Pay attention to the material of this design.
Stainless steel is best for such tools. All the basic elements must be made of it: and tank, and rotor, and cassettes.
Pay attention to the serviceability of the electric drive. No less important is its power, after all, it will determine the speed of the maximum possible speed.
And this, eventually, will depend on that time, which the owner of the apiary will spend on harvesting. If you decide to automate your farm, then the device with the electronic drive will allow you to reduce essentially terms of processing of the site.
The two-frame design has a fairly low price. The point is, that it is designed for the minimum number of frames.
And after all modern honey distilleries can process at a time before 24 frames and more. The cost of such electrical devices will be significantly higher, after all, they are designed for use in fairly large apiary farms.
The two-frame typewriter possesses not only high productivity, but also compact dimensions. Its light weight will allow you to easily transport it around your apiary.
When operating the machine, it is necessary to pre-install it on a flat and flat surface. 2 cassettes are filled with frames: at the same time it is necessary to watch that, that they contained approximately the same amount of honey by weight.
First, a complete pumping of honey from one side of the frame, and then the cassettes are turned over and the procedure is repeated. After completion of all works it is necessary to put the typewriter in order, cleaning it from traces of sweet bee products, otherwise it may become clogged and fail.
Purchase
If you decide to buy honey, you have to approach this question competently. If you own a small apiary, then you will probably have enough to buy a 2-frame honey extractor.
And it's not even in the territory or the number of hives, and in the internal structure of houses for bees.
When collecting honey, it is important not to damage the frames and honeycombs, which means, that to select a design of stock it is necessary taking into account quantity of frameworks, present inside the hive.
Modern types of equipment have a very well thought out device.
You can not only increase the speed of harvest by using them, but also to achieve that, so that all the honey got into a special honey pocket and nothing was lost.
Moreover, the frames and honeycombs themselves will not be deformed, and will be preserved in its original form. The collection of sweet bee nectar is very careful, in a gentle way, but it is very important for the further development and prosperity of your apiary.
If you bought honey from a reliable manufacturer, then the frame will fit very tightly to its design. This will ensure their complete preservation during operation of this electrical device.
And you can buy it here «».
