Apiary

Beehive of plywood with their hands: drawing, a photo, video.

For building bee houses today use a variety of materials, not just traditional wood.

Quite popular among beekeepers design is considered a hive of plywood.

It is convenient, practical, with proper assembly of durable.

Plywood belongs to the category of environmentally friendly materials, as consisting of several layers of veneer wood of the same, as well bees live and develop in such buildings.

Hives come out strong and durable, warm and dry.

With additional processing outside the natural moisture resistant impregnation can serve for a long time without overhaul.

The main advantage of plywood construction is its low weight.

Hives, built with this material, go relatively light, which greatly facilitates the work of the beekeeper apiary maintenance throughout the season.

If necessary transportation of bees or during migrations lightweight and easy to use facilities become critical.

Use plywood as a feedstock for hives is most beneficial.

Plywood does not belong to the warm materials, but combined with a sheet foam.

So easy insulated hive, which without additional insulation can be used in regions with cold winters long.

Summer layer of insulation will prevent overheating of internal space bee house insect and help keep it constant microclimate.

If you buy ready-made products, then it is less expensive wooden counterparts, as the price of the material is small.

Those, who make their own hives for bees, hives plywood attracted to low cost feedstock and speed of installation design of any type.

in addition, homemade version can be made, adapting its structure as much as possible under its conditions of business, make it most convenient to use for yourself and comfortable for living and productive life of bees.

Knowing, how to make a hive of plywood, can in a short time to equip inexpensive apiary, comfortable and functional beekeeping inventory.

1. Rules of installation
2. Warm beehive of plywood

Beehive plywood: installation rules

First, we should define the type of construction, scheduled to do, to study drawing and deal with the necessary quantities.

The basis for building projects can take the wooden hives, but with the expectation, that will be used instead of wood veneers.

Required options are only internal models.

The easiest way to make a hive dvukorpusnyy.

It is done by 12 framework, respectively inner corpus size is equal to the width and length 450 mm 310 mm in height.

External dimensions vary and depend on the thickness of the material used.

Read: Finnish hives for bees, or hives Biboks

So how to make a hive of plywood with their hands:

First, it is necessary to mark and cut 12 fragments, which will have a size 450 on 310 mm 4 components 450 on 306 mm (the front and rear walls).

It is recommended to use plywood 8 and 10 mm, bee house so get stronger and warmer.

Now we need to connect with each of these elements, prokleyivshy their glue for wood.

One edge they need to be matched, по іншому на передній і задній стінці утворюються виїмки – фальці, that will be needed to set a framework.

In the middle of the front of the circular hole is cut for the top notch diameter to 15 mm.

Below vypylyuyetsya square deepening size 250 on 5 мм – для нижнього льотка.

It does not make, If the bottom of the hive is supposed to build removable.

On top of the outside parts of the first building and home underside of the elements of the second and made rebate, that will be needed to install units on each other.

When the blanks are ready, you can start folding boxes.

To do this, before connecting joints promazyvayutsya glue and fastened with nails or screws.

You can apply for fixing construction staples and corners, consolidating the latest on the outer perimeter of body.

The bottom of the first box equipped down, which is made from a sheet of plywood, focusing on the external dimensions of the body.

Well first clash glue, and then finally fix the main mount.

If the bottom is removable, it is made available for drawings and it set the body.

The roof of the hive do so. First, measure the dimensions of the outer perimeter of the upper body.

It will be internal parameters, which made harness. Four of the plates are mounted similarly, a sealed enclosures items.

Fixed on top of the glue and screws sheet of plywood. He will serve as the roof.

To veneers are not worn advance, top cover its roofing, film or sheet iron.

Prylitnu board made from a piece of plywood, cut the required piece and fixing it in the eye.

Pens hive can be made of several layers of material together prokleennoho, nailing them to the side walls of buildings.

For long trouble-free operation and external parts are painted with paint or processed natural waterproof impregnation.

After controlling the entire assembly of the hive and hotel buildings frame, You can run back to live bees.

The remaining types of hives are going the same way, only payments taken other dimensions.

Read more: Polski hives "Lysonia": species, a photo.

Warm beehive of plywood

Popular among beekeepers and uses double-walled hive plywood with additional insulation foam mats.

To make it required thickness of sheet materials 4 mm, insulation of 20 mm and above, wooden bar section equal to the intermediate layer polymer.

As in the previous case, need drawing and exact measurements of the chosen model bee house.

With the timber frame slips, which determines the size of the future elements of the hive.

The internal walls of the binding glue, screws or nails mounted plywood sheets.

The front and rear plates are made smaller in size folds under the scope.

Immediately eye can be done, protecting its perimeter a bar, for, that bees do not vyhryzaly pieces of insulation.

On the side walls in the vicinity of handles flush with the frame preferably nail bar, which will serve as a reliable basis for subsequent installation.

Read: Beehives own hands: drawing.

So a box without a bottom and roof, with cavities for insulation on the outside.

Foam fit without gaps at all the free space in the walls.

Next is another layer of plywood, which are fixed in the joints on the screws and glue.

Подібним чином виконується монтаж і інших елементів конструкції – магазинів, podkrišnika, if they are in the project.

The bottom and roof insulated double-walled hive too, paving layer of foam between two rows of plywood.

The finished structure externally coated with acrylic paint to prevent premature delamination of plywood material.

So easy to manufacture, warm and comfortable model for insects.

Bees live and overwinter well in these hives even in the harshest conditions.