pairs voskotopka

Steam wax furnaces with their hands: drawing.

The work of any beekeeper comes a time, when it is necessary to heat the wax their own hands.

And this requires a wax furnaces, steam or solar.

The latter can not meet the needs of an average beekeeper, so consider options for making steam wax furnaces for extraction of wax sotoramok.

Of course, steam framework wax furnaces sold as a finished product in stores beekeeping, but it is quite expensive, no special advantages over homemade designs.

Besides its hands a unit for extracting wax quite easy to do, especially in the presence of a household stainless steel appliances.

The easiest option making wax furnaces – acquisition sokovarky. Of course, there are such options, a steam washing machine with wax furnaces, the refrigerator, kettle.

Ale sokovarka – Steam is the best homemade wax furnaces for practicality, availability and simplicity for today.

There it is pretty cheap, and its conversion requires additional knowledge, availability drawings, a photo, video and other skills.

Steam wax furnaces with their hands

standardly sokovarku (aluminum or stainless steel) pereobladnuyut during wax furnaces. To do this, divide it into three parts.

The device wax furnaces steam next: The lowest part is intended for water, the second part, secondary, couples are, which rises from the bottom to the top, where the wax.

Plavlyachy, liquid wax gets into the middle of the, whence follows outside.

This device is sufficient, to extract the wax on a small apiary.

Read more: Candles of bee wax its hands.

Instructions for use of its next:

Steam wax furnaces installed at the plate so, to make it parallel to the floor.

Near, displays at the tube from the middle compartment, which implies wax, install a metal container for collecting wax.

After that collect water in the bottom of sokovarky (she Steam wax furnaces) and melted wax, which preloads the top of the device.

This option is so popular wax production, you can find a lot of photos, to see the same process and results.

They are seen, that the quality of the wax is not worse, than with more complex structures, which require hard work and drawings for manufacturing.

Read: How to heat the wax without wax furnaces

While the heated wax Party, especially can not participate in the process and not worry about his success.

If there is enough water and raw materials, You can practically not follow the process steam extraction.

It is important to periodically clean the top of Merv and lay wax, if necessary.

By Merv is very important to follow, because it can score tubes, and wax spilled through them.

Slowly wax bullet in a basin or other vessel to grow, but the quality was not zhubytsya.

Once the melting process is over, get big yellow pancake almost the same, which is in many photo sites.

This draft, you can still clean. To do this, all existing pieces are pure beeswax wax furnaces in distilled again and obtained almost perfectly purified product, which are redeemable for Wax or used for other purposes.

The performance of this unit is high enough. In addition, it can be controlled by the intensity and heat of the fire on the stove.

If the water boils faster, in accordance, quickly begin to melt the wax and distill a purer product.

To the distillation process was qualitative in voskotoptsi, should achieve a complete seal between the lid and utensils, and the time to eliminate the accumulated remains of Merv.

On average, the process takes up wax rendering 3-4 hours.

Of course, Any homemade wax furnaces has disadvantages before factory. Firstly, it is not so powerful and productive.

But if apiary no industrial scale and requires large quantities of wax melting stocks, it is not a big minus.

Per-second, they are less convenient to use. And the third time purely aesthetic: homemade wax furnaces are often not so good, how to purchase, photos which can be seen in shops.

also read: Voskopres: making his own hands.

But these machines plus wax melting obvious – they are much easier and cheaper.

Even if you buy sokovarku and convert it to extract the wax, it will be much cheaper, than buying a new unit for cleaning wax mixture.

Not to mention the conversion of a wax furnaces operating appliances.