Apiary

Separate play for bees with their hands: how to install.

Роздільні ґрати – пристосування для відділення маточного відсіку від робочої бджоли і трутня.

This not penetrate the uterus and drones of their nest to the worker bees.

Size toilers less, than the uterus and drone, so they can move freely in all parts of the bee nest.

established, that when used properly separate grids for bees increases the quantity of honey.

1. Appointment lattice
2. How to make a separate play with their hands?

Appointment lattice

1. division bees;
2. developing new uterus without removing the old;
3. Branch queen from swarm after fertilization (first flight);
4. receiving cellular honey;
5. receiving royal jelly.

This adjustment may be made of plastic or metal.

Some beekeepers say, observing, bees injured playing against separate, but with proper selection of the diameter and thickness of wire centers death toilers excluded.

It should be noted, that this device is not always mesh structure.

There labyrinth-type products, they are also very efficient and made of wood.

Read more: Bdzholovydalyach own hands: drawing, a photo.

How to make a separate play with their hands?

Do not use for making lattice or galvanized rods, which corrode

For this you will need the following tools:

• old frame or board;
• the desired wire diameter;
• nails;
• nippers;
• rivets.

In the beginning you need to make the frame. This can be done, using old frame, or knock building products from boards.

When the foundation is ready, with a ruler measure the distance from one rod to another, Rivne 4,5 mm.

This is the size of a normal worker bee.

drone and queen bee more, so just do not get through in such a small space.

Consider thick bars.

Further, pull wire and fasten it with nails.

Do not forget to install rivets, it will make the job safe with two bars.

It is best to choose a wire, varnished or enamel. If you have a welding machine, you can make a grid of metal.

To do this, make rods of the frame desired size and cut wire in pieces. Align pieces and lay them on the table.

Attach pieces of wire to a metal frame and weld rods. Wire diameter is selected depending on the species of bees.

also read: Bee Susz: what it is.

It can be 4,1 or 4,3 mm. As you can see, роздільні грати для бджіл – це досить просте пристосування, that you can not buy, and make their own hands.