Pasichny cart apilift

Pasichny cart apilift own hands: drawing.

Пасічний підйомник – пристрій, beekeepers used for lifting and transporting beehives.

Beehive quite heavy, and raise them, and especially to move without lift very difficult and even impossible.

Of course, You can buy beekeeping cart, but its price is high enough, because not every beekeeper can afford such a purchase.

Given this apilift own hands is very useful product.

1. design lift
2. The principle of apilifta
3. Self production apilifta

design lift

When you see apilift, a thought about the simplicity of its design. But it is not so.

The cart is so complex, without drawing, photos and videos do it will be difficult.

Despite the relatively simple job, It has many functional details, which are essential.

so, Classic design platform is made of metal with a special feature for taking the hive and moving parts for transportation.

The fascinating part is the side clamps, not to let hive. The important part is apilifta lift, which consists of several blocks, lever and latch.

The principle of apilifta

It works very simply lift: side clamps fixed housing hive.

It uses a lever. You can perform any action on transportation.

Self production apilifta

After studying drawing and photo process, You can try to do this same design.

You need to prepare metal, need fixing (bolts, nuts), springs, wheel, cable and welding machine for sealing all this.

First, make a frame, namely its lateral supports, pipe fastening profile 40 x 20 mm.

On the outside of the pipes make 20-mm propyl, to ensure that the movement axis bearings, then top rack insert screws to prevent loss of bearings.

The upper part is sealed rack with handles, as in any garden cart.

Rama lift make four poperechok, the top of which is welded in the middle of the side bars, нижню – до їх торцях, а решта – до задньої частини стійок.

The bottom crossbeam must install brackets wheels, so there pre-made hole.

The top is a cross-roller bearing with for lifting.

In the second post fixed coil of rope, and lever handle.

Каретка – головна частина апіліфта, make it most difficult.

On cross-set side clamps, and at the very bottom crossbeam mounted unit for cable.

Details of the installation process carriage wish to review the video or photo, to visually understand, a fixed gear.

Today there are many ideas, how to make a platform for bees, as it claimed the purchase and very expensive.

One of the most successful and practical solutions are drawing Sidorov, photos which can be found online.

Following it contains dimensions and details, You can pick up pretty good kit, which will serve for many years.

Of course, as well as any apilifti, clips can then weakened, but this design will last for many years and certainly will save many spine problems when moving hives.